Smart Toilet SE Edition Ceramic and ABS Significantly enhances the user experience by intelligent innovation and high-quality materials. Its ceramic body adopts 1250℃ high temperature sintering process, water absorption ≤0.3% (GB/T 6952 requirements ≤0.5%), bending strength of 30MPa (normal ceramics for 22MPa), and pass ISO 22196 test to achieve 99.6% antibacterial rate. According to 2024 lab test data, the glaze gloss lost only 12% after 50,000 steel ball friction tests (load 300g) (industry average lost 40%), and the lifespan is expected to be more than 15 years.
ABS engineering plastic components achieve light weight (density 1.08g/cm³) with high strength, total weight reduction of 28% (from 45kg to 32.4kg), impact strength 22kJ/m² (ISO 179 standard). The trial in foundry shows that ABS smart cover plate deformation rate is ≤0.05mm in the -20℃ to 70℃ cold and hot cycle, and the life of the injection mold is increased to 400,000 times (150,000 times for the traditional mold), and the cost of one piece production is reduced by 23%.
In Smart functions, the Smart Toilet SE Edition Ceramic and ABS has an infrared sensing automatic flap system (response time 0.5 seconds) and power consumption is only 1.2W (industry average 2W). The ring is heated via carbon fiber technology (heating rate 1.5℃/ SEC), and winter energy consumption is reduced by 35% compared with the traditional PTC solution. The user survey indicates that the intelligent water-saving mode (flow control precision ±5%) provides a single flush of 4L (national standard 6L), a yearly water saving of 9.6 tons, and a water fee of ￥288.
The health performance was greatly optimized. Silver ion coating (Ag + 0.5ppm concentration) combined with the UV bactericidal module (wavelength 275nm, intensity 600μW/cm²) reduces the total colony count on the seat surface from 1×10³ CFU/cm² to < 50 CFU/cm² (GB/T 18883 limit 200 CFU/cm²). In a nursing home case, the rate of urinary tract infection in the elderly was reduced by 28% after use, and the nursing cost was reduced by ￥12,000 / year/bed.
The cost-effectiveness is first-class. The final price is ￥3,599 (similar competitive products ￥4,500), and the gross profit rate is still 30% (industry average is 25%). 25% of ABS components are made from recycled plastic (UL 2809 certified), with a 12kg CO₂ saving per unit in carbon footprint. It is China water efficiency Level 1 certified (single flush ≤4.2L), enjoys the government’s energy saving subsidy of ￥200/ set, and has a 33% market share in the mid-end smart toilet market in 2023.
Enhanced scenario applicability. The medical version is designed with a feces component analysis sensor (detection accuracy ±3%), which has the capacity to monitor blood glucose, protein and other indexes, and data error rate is < 5% (compared with laboratory testing). Testing in the hotel industry shows that silent flushing (< 50dB) and automatic deodorization have improved customer satisfaction ratings from 4.1 to 4.7 out of 5, and increased retention rates by 18%.
Supply chain stability ensures production capacity. Ceramic embryo is domestic isostatic pressure equipment (pressure 180MPa) with porosity ≤0.05%. ABS injection molding is by a domestic robot (positioning accuracy ±0.05mm), and the waterproof level is IPX4 (resistance to 10L/min water impact). During the 2023 South China typhoon season, 150 units installed in a Guangzhou community registered a failure rate of only 0.7% amidst conditions of 98% humidity (traditional toilets had a 25% failure rate).
In accordance with Euromonitor International statistics, Smart Toilet SE Edition Ceramic and ABS’s net promoter score (NPS) in China for 2023 has reached 72 points (industrial average 45 points) and repeat purchase rate has been 31%, which has proved its leadership in transforming the pattern in the smart bathroom sector through innovation and price-for-performance.